LKC Front Spacers Lift Kit 30mm for Fiat Ducato 2006-Present

  

LKC® 30 mm Alu Front Lift Kit - Fiat Ducato / Jumper / Boxer / Movano.

Material: Aluminum · Position: Front axle · Height: 30 mm · Manufacturer: LiftKitCar® · Color of your choice: red or black. If no color is specified, we ship in red.

Delivery contents:
2 × front spacers (aluminum, 30 mm)
6 × high-strength 10.9 bolts + washers

Color: red or black, please specify when purchasing.

Example: effect of the LKC® lift kit - visibly more ground clearance and a more stable stance.

1 More ground clearance and protection.

Easier passage over rough terrain, deep ruts, curbs, thresholds, and bumps.
Reduced risk of damage to the oil pan, exhaust system, and underbody components.
Less scraping of bumpers and wheel arches on steep driveways and exits.
Compensates for sagging springs and restores the vehicle’s original height.

Cost-effective compared with a major chassis conversion or larger wheels.
Easy installation without major modifications to the vehicle structure.
Available for a wide range of vehicle models.
Less tilt when loading; the vehicle sits more level.

Balances the body when one axle has dropped more than the other.
A robust, confident look thanks to the slightly raised vehicle position.

4 Note on the LiftKitCar® brand.

LiftKitCar® (LKC®) stands for carefully assembled lift kits with tested quality, precise selection, and clean packaging. All sets are checked and prepared by our team to ensure safe and reliable installation. There are also lower-quality replicas on the market with insufficient strength or finish. Therefore, only buy tested kits from the LiftKitCar® brand - quality and safety first.

Warranty: 10 years on the material and workmanship of the LiftKitCar® kits we assemble. In the event of proven manufacturing defects, we offer a free replacement or a refund of the purchase price.

Vehicle compatibility:
Fiat Ducato (X250 / X290) · model years 2006 - 2025
Citroën Jumper / Relay · model years 2006 - 2022
Peugeot Boxer · model years 2006 - 2022
Vauxhall / Opel Movano (new model) · from 2022

Example image: LKC® spacers / lift spacers - configurations according to your wishes.

Material and height: polyurethane (PU) and aluminum in 20 mm and 60 mm.

Colors: red or black (standard: red).
Set options: complete set or only front axle / only rear axle.
Combinations: individually combinable - for example front 20 mm PU, rear 30 mm aluminum.
Red or black (selectable; standard: red if no color is specified).

Delivery contents:
2 x front spacers, 6 x 10.9 bolts + washers

Show installation details.

Easy installation: Bolt-On - no welding, drilling, or modification.

Self-installation: possible with basic knowledge; a specialist workshop is recommended.
After installation: axle alignment recommended (geometry and tire wear). 1 to 2 hours (depending on the model).

In different countries - including Germany, Austria, France, Italy, Spain, Poland, the United Kingdom, the United States, Australia, and the United Arab Emirates - different national requirements apply to the approval and documentation of suspension modifications, for example TÜV, ABE, DEKRA, DOT, etc.

For the lift kits offered here with a moderate increase of up to approx. 30 mm, in many cases no separate technical inspection approval is required, provided that no safety-relevant changes are made to the braking system, steering, or axle geometry.

Note: for lifts of more than 30 mm, individual approval may be required depending on the region. Since regulations may be interpreted differently from region to region, we always recommend consulting the relevant inspection body (TÜV, DEKRA, GTÜ) before making structural changes to the vehicle.

LiftKitCar® does not provide national TÜV or ABE certificates, as these are regulated individually depending on the country, vehicle model, and version. Our aluminum and PU spacers are manufactured according to European quality standards and tested for fit and material strength. Our aluminum spacers are made from a high-quality aluminum alloy (similar to EN AC-46500).

The material has been tested in an independent laboratory - a material test report is available and can be provided on request.

Note: Use is at the vehicle owner’s own responsibility. Please check the legal requirements in your country or state before officially registering structural modifications.

LiftKitCar®: ground clearance that doesn’t give up.

Robustness and stability - made to overcome, not avoid.

Official sponsor of the Sahara trip 2025 - LiftKitCar®.

The Driven to Extremes Sahara expeditions take place every year and are open to all interested people - participation possible even without previous experience.
Not sure whether the set fits? Send us your chassis number (VIN) - we will check compatibility within one hour during working hours.

Our LiftKitCar® team usually replies within 1 hour during working hours.

Service and support from LiftKitCar® - your absolute guarantee of results.

We build relationships based on trust and responsibility. Every customer is more than an order to us - a partner. If the set does not fit perfectly, we offer a quick exchange or refund - clear, honest, and simple.

We support you until the result is achieved: from selection to successful installation.
Tested in Europe and the Sahara - reliable even under heat, dust, and long-distance loads.
Easy installation and full OEM compatibility - bolt-on, without modifying stock parts.

Quality responsibility - LKC® is our product: we assemble, test, and guarantee the sets.
We work only with manufacturers whose components match perfectly - for reliability and durability.

Personal support - from selection to successful installation.
Orders are processed within 1-2 business days and handed over to logistics. Our shipments are sent twice a week by mail and handed over to DHL, DPD, or GLS. Average delivery time within the EU: 7-14 business days.

If a shipment is lost or significantly delayed, we will resend the item at our expense and provide financial compensation. We guarantee that you will receive your order safely and that you will be satisfied with our service.
If you decide not to install the item, you can return it within 30 days. Return shipping costs are borne by the buyer.

The goods must be in their original packaging and must show no signs of installation. Refunds are made after inspection within 1-3 business days using the same payment method.

LiftKitCar® - Premium Lift Kits 20-40 mm.