LKC 30mm Aluminum Front Lift Kit Fiat Ducato 1987-1992
Material: Aluminum · Position: Front axle · Height: 30 mm · Production: LKC® / LiftKitCar®. Delivery contents
2 × front lift spacers (aluminum, 30 mm)
Fasteners (screws, nuts, washers)
Color: Red (standard) or black (on request)
Example: effect of the LKC® lift kit - visibly more ground clearance and a more stable stance.
1 More ground clearance and protection.
Easier passage over off-road terrain, deep ruts, curbs, thresholds, and bumps.
Reduced risk of damage to the oil pan, exhaust system, and underbody components.
Less scraping on bumpers and wheel arches when driving into and out of steep entrances.
Compensates for sagging springs and restores the vehicle’s original ride height.
Cost-effective compared with a major chassis conversion or larger wheels.
Easy installation without major structural modifications to the vehicle.
Available for a wide range of vehicle models.
Less tilt when loading; a more level and stable vehicle stance.
Balances the body when one axle sits lower.
Robust, confident appearance thanks to the slightly raised vehicle position.
LiftKitCar® (LKC®) stands for carefully assembled lift kits with tested quality, precise selection, and clean packaging. All kits are checked and prepared by our team to ensure safe and reliable installation.
There are also lower-quality replicas on the market with insufficient strength or finish. So buy only tested LiftKitCar® brand kits - quality and safety first.
Warranty: 10 years on the material and workmanship of LiftKitCar® kits assembled by us. In the event of proven manufacturing defects, we offer a free replacement or a refund of the purchase price. Vehicle compatibility
Fiat Ducato · 14-280B8W-VAN-4X4/293 · Year of manufacture 1990
Sample image: LKC® spacers - configurations according to your wishes.
Material and height: Polyurethane (PU) and aluminum in 20 mm and 60 mm.
Colors: Red or black (standard: red).
Kit selection: complete set or only front axle / only rear axle.
Combinations: individually combinable - for example front 20 mm PU, rear 30 mm aluminum.
Red (standard) · Black (on request)
Delivery contents
2 × front aluminum spacers + mounting hardware
Show installation details.
Easy installation: Bolt-On - no welding, drilling, or modification. Self-installation: possible with basic knowledge; a specialist workshop is recommended. After installation: axle alignment recommended (geometry and tire wear). 1 to 2 hours (depending on the model). Certificates and approval
In different countries - including Germany, Austria, France, Italy, Spain, Poland, the United Kingdom, the United States, Australia, and the United Arab Emirates - different national requirements apply to the approval and documentation of chassis modifications, for example TÜV, ABE, DEKRA, DOT, etc.
For the lift kits offered here with a moderate increase of up to approx. 30 mm, in many cases no separate inspection approval is required, provided that no safety-related changes are made to the braking system, steering, or axle geometry.
Note: for lifts of more than 30 mm, individual approval may be required depending on the region.
Since regulations can be interpreted differently from region to region, we always recommend consulting the relevant inspection authority (TÜV, DEKRA, GTÜ) before any structural changes are made to the vehicle.
LiftKitCar® does not provide national TÜV or ABE certificates, as these are regulated individually depending on the country, vehicle model, and version. Our aluminum and PU spacers are manufactured according to European quality standards and tested for fit and material strength. Our aluminum spacers are made from a high-quality aluminum alloy (similar to EN AC-46500). The material has been tested in an independent laboratory - a material test report is available and can be provided on request.
Note: Use is at the vehicle owner’s own risk.
Please check the legal requirements in your country or state before officially registering structural modifications.
LiftKitCar®: ground clearance that doesn’t give up.
Ruggedness and stability - made to get through, not around.
Official sponsor of the Sahara trip 2025 - LiftKitCar®.
Driven to Extremes Sahara expeditions take place every year and are open to anyone interested - participation is possible even without prior experience. Compatibility check (VIN)
Not sure whether the kit fits?
Send us your chassis number (VIN) - we will check compatibility within 1 hour during business hours. Contact the seller
Our LiftKitCar® team usually replies within 1 hour during business hours.
Service and support from LiftKitCar® - your absolute guarantee of results.
We build relationships based on trust and responsibility. Every customer is more than an order to us - a partner. If the kit does not fit perfectly, we offer a quick exchange or refund - clear, honest, and simple. We support you until the result is achieved: from selection to successful installation.
Tested in Europe and the Sahara - reliable even under heat, dust, and long-distance loads. Easy installation and full OEM compatibility - bolt-on, without modifying stock parts.
Quality responsibility - LKC® is our product: we assemble, test, and guarantee the kits. Cooperation only with manufacturers whose components fit together perfectly - for reliability and durability. Personal support - from selection to successful installation. Processing and shipping
Orders are processed within 1-2 business days and handed over to logistics.
Our shipments are handed over twice a week to DHL, DPD, or GLS. Average delivery time within the EU: 7-14 business days. LiftKitCar® delivery guarantee
If a shipment is lost or significantly delayed, we will resend the item at our expense and provide financial compensation.
We guarantee that you will receive your order safely and be satisfied with our service. Return and withdrawal
If you decide not to install the item, you may return it within 30 days. Return shipping costs are borne by the buyer. The goods must be in their original packaging and must show no signs of installation.
Refunds are issued after inspection within 1-3 business days using the same payment method.
LiftKitCar® - Premium Lift Kits 20-40 mm.