Fiat Ducato 9 DSP Amplifier Audio Kit, Speakers + Optional Subwoofer

  

This product sheet was automatically translated. If you have any questions, please do not hesitate to contact us.

More clarity and more bass for the Fiat Ducato Series 9 with factory radio preparation.

This complete V2 set is the right solution for your Fiat Ducato Series 9 if you want to install speakers, a subwoofer, and a DSP power amplifier in a clean plug & play system.

You replace the front speakers, add the Rock-2 subwoofer, and integrate the ultra-compact DSP power amplifier directly into your camper using the included wiring harness. This gives you more control, more dynamics, and much more bass without having to cut the original cables or convert them laboriously.

Important information and requirements

This audio system fits directly if you have an aftermarket radio installed with an ISO connection. If you have a factory-installed FIAT radio, you also need the appropriate adapter for the Ducato Series 9.

If you have the 10-inch U-Connect radio installed, you need the appropriate complete kit for that radio variant instead.

Note about the subwoofer:
The passive subwoofer can be installed precisely and flush between the front seats of the Fiat Ducato / Citroën Jumper / Peugeot Boxer.

This is what this set gives you.

With this set, you can replace the front speakers and add a subwoofer between the front seats.

The DSP6 power amplifier drives the front system and the Rock-2 subwoofer with the appropriate power, ensuring more dynamics, more bass, and more controlled playback in the camper.

OPTION
Ducato speakers for more clarity and noticeably sharper front sound.
Rock-2 subwoofer for stronger and more precise bass in a small space.
DSP6 power amplifier for more power, more control, and clean system tuning.
Plug & Play integration with a vehicle-specific wiring harness.

Invisible installation of the power amplifier in the radio slot thanks to its compact design and low heat generation.
Removal tool, insulating mat, and mounting hardware for a clean installation.

Interaction:
The speakers, DSP power amplifier, and Rock-2 subwoofer work together to provide more bass, more precision, and a much more balanced sound in the Fiat Ducato Series 9.

The complete installation is plug & play.

The front speakers are replaced with the OPTION Ducato speaker system. The DSP power amplifier is integrated quickly and neatly into the camper using the included wiring harness. The Rock-2 subwoofer is mounted precisely between the front seats.

Two channels are used for the front system, and two additional channels are available for rear speakers and a passive subwoofer. Two additional channels are available via the line-out connection to connect active subwoofers or additional power amplifiers and control them via DSP.

If you have any questions about installation, the product, or the correct radio variant, we will be happy to help you.

If you have a factory-installed FIAT radio, a suitable adapter is also required. The matching complete kit is required for the 10-inch U-Connect radio.

Package contents

1 x OPTION DSP6 power amplifier incl. DSP configuration already installed for your vehicle.
1 x OPTION Ducato speaker system.

1 x Rock-2 subwoofer (6.6 kg).
1 x wiring harness for Plug & Play installation, incl.

1 x alubutyl insulating mat.

Highly efficient 6-channel DSP amplifier
6-channel amplifier / 8-channel DSP
6 x 60 watts RMS (4 ohms)
4 x 60 watts RMS (4 ohms) + 1 x 120 watts RMS (switchable 2-ohm mono mode)
Channels 5 and 6 operate in stereo mode for subwoofers.
Minimum impedance on all stereo channels: 3 ohms.
Minimum impedance in mono operation: 1.5 ohms.
ADEP 3 diagnostic protection for easy connection to OEM radios.
Start/stop compatible down to 5 seconds at 6 volts.

High-level input (4 channels) with automatic turn-on/off.
Frequency range: 20 Hz to 21 kHz.
Integrated 8-channel DSP processor, 358 kHz.
Operating voltage: 10.3 V - 17.5 V.
Power reduction in medium power mode.

Minimal dimensions for easy retrofitting.
94 x 149 mm x 32 mm (118 x 149 mm with bracket).

Standby current consumption: 0.6 mA.
Main connection: Molex MiniFit Jr.
Subwoofer connection: Molex MiniFit Jr.
Programming port for DSP-Eprom: RJ-45 modular jack.
Remote control connection: RJ-45 modular jack.

All necessary information and payment options are displayed in this process.

You will also find all relevant information regarding your purchase there.

If you encounter any problems, call us!

We will inform you as soon as we have received your payment and handed your goods over to DHL. Except during the lunch break from 12 p. As the seller, we always bear the shipping risk for private customers in accordance with the law.

Please use the payment process.